Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 69)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 69
Communicate with Devices on an Ethernet Network Chapter 3
Configure a MSG Instruction
How you configure the MSG instruction depends on the target device.
1. Click MSG to launch the Message Configuration dialog box.
2. On the Configuration tab, configure the following.
For this item Specify
Message Type CIP Data Table Read or
CIP Data Table Write
Source Element Tag containing the data to be transferred
Number of Elements Number of array elements to transfer
Destination Tag Tag to which the data will be transferred