Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 81)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 81
Communicate with Serial Devices Chapter 4
Your SoftLogix Chassis Monitor looks like this example.
Step 2: Configure the Serial Port of the Controller in the Project
Complete these steps to configure the controller in your project.
1. Open a project in the Logix Designer application and add the controller to
the I/O Configuration folder.
Refer to Step 3: Configure the Controller in the RSLogix 5000 Project on
page 32.
2. From the Edit menu, choose Controller Properties.