Step 6: schedule the network – Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual User Manual
Page 209
Advertising
![background image](/manuals/579826/209/background.png)
Rockwell Automation Publication 1789-UM002J-EN-P - December 2012
209
Communicate with Devices on a ControlNet Network
Appendix B
Step 6: Schedule the Network
Use RSNetWorx software to schedule the ControlNet network. The controller
project must already be downloaded from RSLogix 5000 software to the
controller and the controller must be in Program or Remote Program mode. For
more detailed information, see the RSNetWorx for ControlNet Getting Results
Guide, publicat
.
These steps describe how to schedule the network.
1. Launch RSNetWorx for ControlNet software.
2. From the Network menu, choose Online to go online and survey
the network.
Advertising