Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 205)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 205
Communicate with Devices on a ControlNet Network Appendix B
The New Module dialog box appears.
4. Enter the module name and slot number.
5. Make sure the Open Module Properties box is unchecked.
6. Click OK.
7. Add an output I/O module, right-click 1794-ACNR15/C adapter card in
the I/O Configuration folder and choose New Module.
The Select Module dialog box appears.