Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual User Manual

Page 30

Advertising
background image

30

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012

Chapter 2

What is the SoftLogix System?

3. Click Add New and click OK.
4. Select AB-VBP-1 RSLinx Classic Driver from the list and click Configure.

The driver must be running if SoftLogix is used. If the driver is deleted
while SoftLogix is running after choosing a slot other than zero for the
RSLinx module, RSLinx chooses the next available slot in the
chassis monitor.

5. From the Slot Number pull-down menu, choose the slot for the

RSLinx module.

6. Click OK and then click Close.

This SoftLogix Chassis Monitor now shows the RSLinx module in slot 5.

In addition to configuring your controller in the SoftLogix Chassis
Monitor, you must create the controller as part of your RSLogix 5000
project before you can configure and program it.

Advertising