Step 2: configure the port – Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual User Manual
Page 180
Advertising
180
Rockwell Automation Publication 1789-UM002J-EN-P - December 2012
Appendix A
Communicate with Devices on a DeviceNet Network
Step 2: Configure the Port
You must configure the port the first time you use a 1784-PCIDS card.
To configure the port, follow these steps.
1. From Setup menu, choose Configure Port.
The DeviceNet Driver Selection dialog box appears.
2. Select the Allen-Bradley 1784-PCIDS driver and click Select.
Advertising