Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 255)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 255
Status Indicators Appendix F
SoftLogix EtherNet/IP
Module Status Indicators This section describes the EtherNet/IP modules’ status indicators for the
SoftLogix system.
The EtherNet/IP modules have these status indicators.
Link Status (LINK) Indicator
Indicator Description
1 Module display status
2 Module status indicators
LINK Indicator Display Description
Off No link • The module is not connected to a powered Ethernet device.
• The module cannot communicate on Ethernet.Verify that all
Ethernet cables are connected.
• Verify that the Ethernet switch is powered.
Flashing green Data transmission • The module is communicating on Ethernet.
• Normal operation. No action required.
Solid green Link OK • The module is connected to a powered Ethernet device.
• The module can communicate on Ethernet.
• Normal operation. No action required.
1
2