Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 27)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 27
What is the SoftLogix System? Chapter 2
Configure the SoftLogix
Controller You must first create and configure your SoftLogix controller, that is, catalog
number 1789-L10, 1789-L30, or 1789-L60, in the virtual chassis monitor.
Step 1: Create and Configure the Controller in the SoftLogix Chassis
Monitor
When you install a controller, the Chassis Monitor lets you configure specific
characteristics about the controller. To configure the controller in the Chassis
Monitor, follow these steps.
1. In the SoftLogix Chassis Monitor, from the Slot menu, choose
Create Module.
The Select Module dialog box appears.
2. In the Select Module dialog box, select your module type and enter the
Slot number.
RSLinx software defaults to slot 0, but you can move it to another slot if
set up for this functionality. See
page 29 .