Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 57)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 57
Communicate with Devices on an Ethernet Network Chapter 3
You build the I/O configuration in this order.
1. Add
(see page 50 ) the remote adapter to the SoftLogix 5800
EtherNet/IP module of the controller (1794-AENT/A
remote_flex_adapter).
2. Add
(see page 50 ) the I/O modules to the remote adapter (1794-IA16/A
remote_flex_input, 1794-CB16/A remote_flex_output, 1794-
IF2XOF2I/A remote_flex_combo).
Adapter
Module
Adapter
Distributed I/O
Modules