Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 204)

204 Rockwell Automation Publication 1789-UM002J-EN-P - December 2012
Appendix B Communicate with Devices on a ControlNet Network
Add and Configure I/O Modules for the Remote Communication Module
1. Add an input I/O module, right-click 1794-ACNR15/C adapter card in
the I/O Configuration folder and choose New Module.
The Select Module dialog box appears.
2. Expand the Digital list.
3. Select the input module and click OK.
For this example, we chose the 1794-IB16/A 16 Point 24V DC Input,
Sink module.