Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual User Manual
Page 28
Advertising
28
Rockwell Automation Publication 1789-UM002J-EN-P - December 2012
Chapter 2
What is the SoftLogix System?
For this example, we will enter slot 1 for the 1789-L60
SoftLogix controller.
3. Click OK.
The General dialog box appears.
4. In the General dialog box, enter Startup Mode, Memory Size and Periodic
Save Interval values.
5. Click Next.
The NT System dialog box appears.
6. In the NT System dialog box, enter Continuous Task Dwell Time, CPU
Affinity, and Channel Serial Port values.
7. Click Finish.
Advertising