Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 107)

Touchscreen Calibration
This chapter describes how to use the RAC6182 Touchscreen application
to calibrate the RAC6182 Industrial Computer touchscreen.
The RAC6182 touchscreen is factory-calibrated. However, it may be
necessary to periodically recalibrate the touchscreen to adjust for any
drift in the pointer. To recalibrate the touchscreen, you touch targets
displayed by the calibration.
Touching the display with a finger is sufficient to perform the calibration
process; however, you can use a stylus to increase the accuracy of the
calibration. Do not use a sharp instrument or any pointing device that
may puncture or damage the RAC6182 touchscreen overlay material.
You calibrate and configure the touchscreen using the Touchscreen
application in the Windows CE Control Panel.
To calibrate the touchscreen:
1. To set up the touchscreen, select Start-Settings-Control Panel. Select
or double-click on the Touch Screen icon.
Chapter
10
Chapter Objectives
Setting Touchscreen
Properties