Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 109)

Touchscreen Calibration 10–3
Publication 6182-UM001D-EN-P
To disable the mouse cursor:
On RAC6182 Industrial Computers with a touchscreen, you may want to
disable the mouse and remove the mouse cursor from the screen. You can
use either the Touchscreen application or the Control Panel Mouse
application to change this setting.
1. On the Cursor tab, clear the Enable Cursor checkbox to disable the
mouse and remove the mouse cursor.
2. Press Enter or click the OK button to save the settings and Exit.
You must turn off power to the RAC6182 Industrial Computer for
this setting to take effect.