Set the default configuration for any key – Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System User Manual
Page 86
Advertising
8–18 Keypad
Operation
Publication 6182-UM001D-EN-P
Set the Default Configuration for Any Key
1. Select one or more keys or use the edit menu Select All Keys. See
“Selecting Keys” above.
2. Choose Set Default Configuration from the Edit menu.
Figure 6
Set Key Default
The selected keys are set to their default assignments. Non-
programmable keys are enabled by default. The default key assignments
are listed at the end of this chapter.
Advertising