Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 75)

Keypad Operation 8–7
Publication 6182-UM001D-EN-P
You configure the RAC6182 Industrial Computer keypad using the
Keypad application in the Windows CE Control Panel.
To change the keypad operation:
1. To start the Keypad application, select Start-Settings-Control Panel.
Select or double-click on the Keypad icon.
2. On the Repeat tab, select the following options as necessary:
To enable repeating for all keys, select the Enable Character
Repeat checkbox.
To adjust how much time elapses before characters repeat, drag
the Repeat Delay slider control.
To adjust how quickly characters repeat when you hold down a
key, drag the Repeat Rate slider control.
Setting Up the Keypad