Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 22)

2–2 Installation
Publication 6182-UM001D-EN-P
The following replacement clips can be ordered from Rockwell
Automation:
Part Number Description Quantity Use For
6189-2MTGKIT Mounting clips Package of 4
clips Replacement item
In addition to the tools required to make the cutout, you will need a
#2 Phillips-head screwdriver and a torque wrench.
Allow adequate space for mounting, air flow, and maintenance. The
figure below shows recommended minimum clearances to other
components within the rack or enclosure.
ATTENTION: The RAC6182 Industrial Computer should
not be operated within a confined space of the dimensions
shown below unless adequate ventilation or other cooling
methods are used to lower the air temperature within the
enclosure.
Tools Required
Mounting Clearances