Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 123)

Communications Configuration 13–5
Publication 6182-UM001D-EN-P
3. On the PC Connection tab, select the Change button.
4. On the PC Connection Parameters dialog, specify the network host
name for the host PC in the Connect PC Name field and specify the
IP address for the host PC in the Connect PC IP Addr field.
5. Select Network Connection in the Connection Method field to
specify that the RAC6182 should use the Ethernet network settings
to connect to the host PC.
6. Press Enter or click the OK button on the PC Connection Parameters
dialog to save the settings and Exit.
7. Press Enter or click the OK button on the Communications
Properties dialog to save the settings and Exit.
For information on connecting to the host PC, refer to Chapter 15,
Managing User Applications.
Setting up the RAC6182 Industrial Computer to communicate over a
serial port consists of two steps:
• Creating a remote networking connection for the serial port
• Setting up the RAC6182 Industrial Computer communications to use
serial communications
Setting Up Serial
Communications