Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 48)

4–10 Adding/Removing Internal Components
Publication 6182-UM001D-EN-P
ATTENTION: The DOC memory is sensitive to ESD
and requires careful handling. Hold the DOC by the
package – do not touch the pins. After removing the
DOC, place the device in an anti-static wrapper.
To access the DiskOnChip socket:
1. Disconnect power to the RAC6182.
2. Follow the procedures beginning on Page 4-2 to open the chassis.
3. Locate the DOC socket on the processor board, as shown on the
diagram below.
4. Use the special DOC extraction tool to hook the edges of the DOC.
Be careful to hook only the DOC with the extraction tool, and not
the socket located directly below the DOC.
DOC Extraction Tool
Chip Socket
DiskOnChip Device