Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 60)

6–2 Initial Operation and Setup
Publication 6182-UM001D-EN-P
Note: The entire power-up process takes approximately 20
seconds. The display is not active for a large portion of
the boot time, but the front panel LEDs toggle to
indicate that the RAC6182 Industrial Computer is
powering up.
4. Use the procedures in Chapter 15, Managing User Applications, to
load and manage additional software applications and data files.
5. If your system does not boot up, or if you notice other problems,
refer to Chapter 16, System Troubleshooting.
To reset the RAC6182 Industrial Computer, cycle external power to the
unit.
After resetting, the RAC6182 Industrial Computer begins the Power On
Self Test (POST). During reset, the RAC6182 Industrial Computer:
• Clears RAM
• Starts the POST
• Loads the operating system
• Starts designated applications.
System Reset