Connecting usb devices – Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System User Manual
Page 30
3–2
Connecting External Devices
Publication 6182-UM001D-EN-P
The RAC6182 Computer has two USB ports. The Windows CE
operating system currently only supports standard USB keyboard and
mouse devices with its native device drivers. A vendor-specific
Windows CE driver will be required for all other USB devices.
The USB device can plug into either of the two side panel USB ports as
shown below. While the USB interface is designed to be connected and
disconnected under power, the Windows CE operating system will not
automatically recognize any changes made under power.
Table D
USB Stacked Connector Pin-Out
PIN Signal
1
USB0VCC (Switched FET current protected)
2 USB0D-
3 USB0D+
4 USB0GND
5
USB1VCC (Switched FET current protected)
6 USB1D-
7 USB1D+
8 USB1GND
9 SHLDGND
10 SHLDGND
Connecting USB Devices