Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 39)

Adding/Removing Internal
Components
This chapter describes how to open the chassis of the RAC6182
Industrial Computer and remove or install:
• PC add-in cards (PCMCIA)
• PCI add-in card
• RAM
• DiskOnChip flash ROM
The RAC6182 Industrial Computer contains line voltages. Make sure
you disconnect all power to the RAC6182 Industrial Computer before
removing covers or access screws.
ATTENTION: Disconnect all power from the RAC6182
Industrial Computer before removing components.
Failure to disconnect power could result in severe
electrical shock or damage to the RAC6182 Industrial
Computer.
Internal RAC6182 Industrial Computer components may be damaged by
Electrostatic Discharge (ESD). Make sure you wear a grounding strap
whenever handling circuit boards, memory modules or other internal
components.
ATTENTION: Wear a wrist strap (well grounded) and
perform work in a static safe environment.
Electrostatic discharge can damage the RAC6182
Industrial Computer and components.
Chapter
4
Chapter Objectives
Safety Precautions