Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 37)

Connecting External Devices 3–9
Publication 6182-UM001D-EN-P
The RAC6182 Industrial Computer has a relay output. This output is a
normally-open hard contact relay rated for 24VDC, 500mA. A two-
contact removable terminal block is used to connect to the relay output.
Note: For instructions on connecting the relay output, refer to
Page 2-8.
The relay output can be used to drive a variety of peripheral signaling
devices such as a tower annunciator light or an audible alarm or buzzer.
The output can also be connected to an embedded control system to
signal a RAC6182-generated event.
Connecting to Relay
Output