Rockwell Automation 2705 RediPanel Push Button Module - Manual (Page 10)

Chapter 1
Overview
1–3
Custom Configuration
Custom configurations support any 16 or 32 of the following 800EP or
800EM devices:
•
Momentary push buttons, illuminated/non-illuminated
•
Maintained push buttons, illuminated/non-illuminated
•
Flush head, extended head, or 40mm mushroom head operators
•
Pilot lights
•
2 position selector switches, illuminated/non-illuminated
•
3 position selector switches, illuminated/non-illuminated
•
Hole closing plugs
3 position devices use two RediPANEL inputs leaving an unused hole on the
front panel (hole plug 800E-N2).
Unpopulated Configuration
You can order an unpopulated 800EM/EP RediPANEL Module. The
unpopulated configuration consists of the enclosure and electronics without
the 800EM or 800EP devices. Each 800EM/EP device is ordered separately.
!
ATTENTION: Only install Allen-Bradley 800EM or 800EP
devices in the RediPANEL module. Using operators from other
manufacturers voids the warranty.