Rockwell Automation 2705 RediPanel Push Button Module User Manual
Page 91
Advertising
Appendix E
Replacing Lamps
E–2
3. Carefully insert the new lamp into the socket.
!
ATTENTION: Before replacing the lens carrier into the push
button, be sure the lamp is seated properly or a short may result.
If installing an LED,the LED must be installed with plus (+)
indicator facing to the left.
4. Replace the keyed lens carrier into the push button.
5. Check for proper operation of the push button.
ЛЛЛ
ЛЛЛ
ООО
ООО
О
ОО
ОО
ЛЛ
ЛЛ
ЛЛ
ЛЛ
STEP 5
STEP 3
Advertising