Rockwell Automation 2705 RediPanel Push Button Module - Manual (Page 90)

A–B
E Appendix
E–1
Replacing Lamps
This appendix shows how to replace lamps in 800A Push Button Modules.
!
ATTENTION: To avoid electrical shock or unintended
operation of the equipment, disconnect power before servicing.
If you replace bulbs on a regular basis, it is recommended that you replace
the entire set.
1. Remove the lens carrier from the push button on the module by gently
prying it out on either side of the carrier with a screwdriver.
!
ATTENTION: DO NOT use the slot on either side of the lens
carrier for prying as it may break the assembly.
2. Remove existing lamp from socket.
!
ATTENTION: DO NOT use the screwdriver or any other metal
object to remove the bulb. Use ONLY the 800M-N5 lamp
replacement tool.
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ОО
ОО О
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ОО
ОО О
ОО
ОО
ОО
ОО
ОО
ЛЛ
ЛЛ
ЛЛ
ЛЛ
Л
Л
ОО
ОО
ЛЛ
ЛЛ
О
STEP 1 STEP 2
800M-N5