D - adding/replacing push button legends, Adding/replacing push button legends – Rockwell Automation 2705 RediPanel Push Button Module User Manual
Page 89
A–B
D
Appendix
D–1
Adding/Replacing Push Button Legends
This appendix describes how to add or replace push button legends for 800A
push button modules.
!
ATTENTION: To avoid electrical shock or unintended
operation of the equipment, disconnect power before servicing.
1. Remove the lens carrier from the push button on the module by gently
prying it out on either side of the carrier with a screwdriver.
!
ATTENTION: Do not use the slot on either side of the lens
carrier for prying. This may break the assembly.
ООО
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ОО
ОО
ОО
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ЛЛ
ОО
ОО
ЛЛ
ЛЛЛ
Л
О
STEP 1
STEP 2
2. Remove the color lens by placing a small screwdriver into the slot on the
back of the lens carrier and gently prying the 2 pieces apart.
!
ATTENTION: Do not use too much pressure when prying the
assembly apart. This may damage the colored lens.
3. Insert the new legend and snap the 2 pieces back together.
4. Replace the keyed lens carrier into the push button.
5. Check for proper operation of the push button.
ЛЛЛ
ЛЛЛ
Л
Л
ЛЛ
ЛЛ
ЛЛ
STEP 3
STEP 5