Rockwell Automation 2705 RediPanel Push Button Module - Manual (Page 97)

A–B
H Appendix
H–1
Installing Color Inserts in Membrane Modules
You can install color legend inserts in the NEMA Type 4X Modules. The
following legend kits are available.
Catalog Number Legend Kit Includes:
2705-N3 2 sheets of white inserts
2 sheets of 4 color inserts
2705-N3W 1 sheet of white inserts
2705-N3R 8 strips (equivalent to 1 sheet) of red legends
2705-N3G 8 strips (equivalent to 1 sheet) of green legends
2705-N3B 8 strips (equivalent to 1 sheet) of blue legends
2705-N3Y 8 strips (equivalent to 1 sheet) of yellow legends
To install color inserts in the NEMA Type 4X module:
1. Remove the 4 screws that secure the back faceplate to the housing.
2. Pull the faceplate away from housing (approximately 2-inch clearance).
3. Slide the inserts in the appropriate row of buttons.
4. Replace the 4 screws that secure the back faceplate to the housing.
Installing Color Legend Inserts