Rockwell Automation 2705 RediPanel Push Button Module - Manual (Page 83)

Appendix B
Custom RediPANEL Modules
B–4
The 800T/H Push Button Modules can contain any combination of the
following 800T or 800H devices:
•
Momentary push buttons, illuminated/non-illuminated
•
Push/Pull push buttons, illuminated/non-illuminated
•
Flush head, extended head or mushroom head operators
•
Pilot lights
•
2 position selector switches, illuminated/non-illuminated
•
3 position selector switches, illuminated/non-illuminated
•
4 position selector switches, non-illuminated
Pilot lights must be either a 120V AC transformer or 120V AC transformer
LED. Push-to-Test lights are not acceptable.
Custom modules are factory ordered or customer installed. To order a
custom unit from the factory, complete a custom order worksheet as
described in Publication 2705-3.3
To modify a standard module in the field, the following 800T/H accessories
are available.
800T/H Accessories Catalog No.
Pre-Assembled Push Button and Adapter Kit
(enter “Z3” as the last 2 digits of selected push button Catalog Numbers). 800H-_ _ _ _ _ _ _ Z3 or
800T-_ _ _ _ _ _ _ Z3
2 position devices using a single shallow contact block.
Exception: Devices using the 800T-XD2 contact block (1 N.C.)
or the 800T-XD4 contact block (1 N.C. Late Break)
800T-N305
All 3 position devices 800T-N306
2 position devices that use the 800T-XD2 800T-N307
4 position Selector Switch 800T-N308
Pilot Light Adapter Cable
For 3 or 4 position devices. Allows additional pilot light. 800T-N309
Custom 800T/H
RediPANEL Modules