Preface - using this manual, Contents of manual, Preface – Rockwell Automation 2705 RediPanel Push Button Module User Manual
Page 6
A–B
Preface
P–1
Preface
This manual gives an overview of the Bulletin 2705 RediPANEL Push
Button Modules and describes how to configure, install, program and
troubleshoot the device on the Allen-Bradley Remote I/O network.
This manual is organized as follows:
Chapter
Title
Description
Preface
Describes the purpose and contents of the manual,
and the intended audience.
1
Overview
Provides an overview of the Bulletin 2705 RediPANEL
modules and the configurations available.
2
Configuring the
RediPANEL Module
Describes how to configure RediPANEL functions
using the module’s DIP Switches. Configuration
includes the rack address, baud rate, handshaking,
flashing lamps, last state and fault mode behavior.
3
Wiring and Installation
Describes how to install the RediPANEL module and
connect the module to a remote I/O link.
4
Programming the
RediPANEL Module
Describes how to program the RediPANEL module
from a PLC or SLC controller. Also covers handshake
mode and response times.
5
Troubleshooting
and Maintenance
Describes how to troubleshoot and maintain the Redi-
PANEL module.
A
Specifications
Provides specifications for the RediPANEL modules.
B
Custom RediPANEL Modules
Describes how to create a custom unit.
C
800A Switch Replacement Kit
and LED Upgrade Kit
Describes how to replace push buttons in the appropri-
ate module. Also provides information for upgrading
from incandescent to LED lamps
D
Adding/Replacing Push Button
Legends
Describes how to replace push button legends in Bul-
letin 800A Push Button Modules.
E
Replacing Lamps
Describes how to replace lamps in Bulletin 800A Push
Button Modules.
F
Converting form Incandescent
Lamps to LED Lamps
Describes how to upgrade a Bulletin 800A Push But-
ton Module from incandescent to LED lamps.
G
Installing/Replacing
Push Buttons
Describes how to replace push buttons in a RediPA-
NEL module.
H
Installing Color Inserts
in Membrane Modules
Describes how to install color legend inserts in Mem-
brane type Modules.
Contents of Manual