Rockwell Automation 2705 RediPanel Push Button Module - Manual (Page 34)

Chapter 3
Wiring and Installation
3–11
Figure 3.5
Depth Dimensions in Inches (mm)
800EM/EP Push Button Modules
6.61
(167.9) Max.
.83
(21.1)
2. Drill eight 0.22 in (5.59 mm) diameter holes for the top and bottom
mounting brackes.
3. Slide the module through the opening and against a 1/16 in (1.6 mm) to
1/8 in (3.2 mm) thick enclosure.
4. Fasten the module in place with the enclosed locking nuts. Alternately
tighten the nuts to a torque of 8 lb-in (0.908 N . m).