Rockwell Automation 2705 RediPanel Push Button Module User Manual
Page 86
Advertising
LED Upgrade Kit
Appendix C
800A Switch Replacement Kit
C–3
6. Remove the screws that secure the PC board to the push buttons.
7. Carefully remove the PC board from the push buttons by gently prying
at each corner of the board.
Template
PC Board
!
ATTENTION: Do not bend any pins on the push buttons.
8. Remove the brass colored retaining ring with the 800A-N50 mounting
ring wrench.
Mounting Ring
800A-N50 Mounting Wrench
9. To access both the front and back of the push button, set the template on
end. The push button can be removed from the front.
Advertising