Rockwell Automation 2705 RediPanel Push Button Module - Manual (Page 36)

Chapter 3
Wiring and Installation
3–13
800EM/EP Steel Enclosure Mounting
To mount a 16 or 32 Push Button 800EM/EP Steel Enclosure Module:
1. Mark the locations of the four mounting holes. See Figure 3.7.
Figure 3.7
Steel Enclosure Mounting Dimensions in Inches (mm)
800EM/EP Push Button Modules
15.50
(393.7)
16 button module
17.50
(444.5)
32 button module
10.00
(254.0)
16 button module
12.00
(304.8)
32 button module
14.75
(374.7)
16 button module
16.75
(425.5)
32 button module
Steel Enclosure
12.94
(328.7)
16 button module
14.94
(379.5)
32 button module
2. Drill four mounting holes suitable for your mounting hardware. The
mounting flange on the enclosure will acommodate up to a .25 in
(13 mm) diameter fastener.
3. Secure the enclosure with the fastening hardware.