Rockwell Automation T8160 Trusted TMR Interface - Manual (Page 36)

Trusted TM TMR Module T8160
Issue 13 May 13 PD-T8160 36
CONFIGURATION
PHYSICAL MODULE:
RACK 1: 16 BOOLEAN inputs Input states of the module as identified by the OEM parameters.
RACK 2: 1 ANALOGUE input Channel faults (I bit per channel) for the module.
0 – channel ok, 1 – channel fault
RACK 3 16 BOOLEAN outputs These channels will force the input LEDs.
Channel 1 is module channel 1, Channel 16 is module channel 16.
Actual input via rack 1 is not affected.
TRUE – LED on, FALSE – LED off.
This function is called every time the board is scanned. Therefore
initialisation is needed at these outputs.
RACK 4 16 BOOLEAN outputs These channels will rest the input of the relevant channel.
Channel 1 is module channel 1, Channel 16 is module channel 16.
TRUE – reset channel, FALSE – no reset. This function is called
every time the board is scanned. Therefore initialisation is needed
at these outputs.
RACK 5 1 BOOLEAN input Input reflecting the board status of the module specified.
FALSE – board ok, TRUE – board fault.
Notes:
1. All parameters must be supplied, even for virtual boards.
2. Trusted TM chassis and slot numbers start at 1, Regent+Plus I/O chassis and slot numbers
start at 1.
EXTRA INFORMATION
The threshold settings are range checked in the ISaGRAF kernal and if they exceed the specified
limits, they are made to equal the maximum/minimum limit.