Rockwell Automation T8160 Trusted TMR Interface - Manual (Page 64)

Trusted TM TMR Module T8160
Issue 13 May 13 PD-T8160 64
4.42. I/O Complex Equipment ‘SX7485’
Description: T7485 Isolated Guarded Digital Output Module 24 to 120V ac/dc. The Isolated
Guarded Digital Output Module provides digitally switched outputs for controlling eight
field loads. The digital output circuits are ‘sourcing’ outputs that switch field power
ranging from 24 to 120V ac/dc. This board definition is used in a simplex
configuration.
Product Description reference: PD-T7034 Isolated Guarded Digital Output Module 24 to 120Vac/dc
OEM PARAMETERS:
OEM parameter Valid numbers Description
TICS_CHASSIS
TICS_SLOT 1 – 10
1 – 8 (Chassis 1)
1 – 12 (Expander
Chassis) The TICS chassis & slot number where the TMR Interface
module is placed
REGENT_CHASSIS
REGENT_SLOT 1 – 16
1 – 10 The chassis & slot number within the Regent+Plus I/O where the
Module is placed.
CONFIGURATION
PHYSICAL MODULE:
RACK 1: 8 BOOLEAN outputs States to be written to the module identified by the OEM parameters.
Channel 1 is module channel 1 and Channel 8 is module channel 8.
TRUE – channel high, FALSE – channel low
RACK 2: 1 BOOLEAN input Input reflecting the board status of the module.
FALSE – board ok, TRUE – board fault
Notes:
1. All parameters must be supplied, even for virtual boards.
2. Trusted TM chassis and slot numbers start at 1, Regent+Plus I/O chassis and slot numbers
start at 1.