Rockwell Automation T8160 Trusted TMR Interface - Manual (Page 73)

Trusted TM TMR Module T8160
Issue 13 May 13 PD-T8160 73
4.50. I/O Complex Equipment ‘M7491_O’
Description: T7491 Multiplexed Output Module (unpacked state version). The Multiplexed Output
Module occupies one slot in the Regent+Plus I/O chassis and provides two serial
communications port interfaces to remote multiplexed digital outputs and addressable
loop devices. This module is used to declare a Matrix Driver Output Unit.
Product Description reference: PD-T7035 Multiplexed I/O Module
OEM PARAMETERS:
OEM parameter Valid numbers Description
TICS_CHASSIS
TICS_SLOT 1 – 10
1 – 8 (Chassis 1)
1 – 12 (Expander
Chassis) The TICS chassis & slot number where the TMR Interface module
is placed.
REGENT_CHASSIS
REGENT_SLOT 1 – 16
1 - 10 The chassis & slot number within the Regent+Plus I/O where the
Module is placed.
PROC_ID 0 – 7 The matrix driver processor number that controls this input unit.
This value selects which of the MDn parameters in the definition of
the T7491 module is used.
UNIT_ID 0 – 3 Up to 4 Input/output units may be attached to each matrix driver.
This parameter is used to indicate the identity of this module.
CONFIGURATION
PHYSICAL MODULE:
RACK 1: 64 ANALOGUE outputs Variable 1 is channel 1, variable 64 is channel 64
Notes:
1. All parameters must be supplied, even for virtual boards.
2. Trusted TM chassis and slot numbers start at 1, Regent+Plus I/O chassis and slot numbers
start at 1.
3. The associated T7491 module MUST be appear in the I/O configuration BEFORE this
module.
EXTRA INFORMATION
Input states :
Channel input is organised as follows:
Bit n+1 Bit n Description
(F)lash (S)tate
0 0 Channel output low.
0 1 Channel output flash slow.
1 0 Channel output flash fast.
1 1 Channel output high