Tweco 400 Ultra-Cut(May 2014) - Manual (Page 12)

ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
1-6 GENERAL INFORMATION Manual 0-5302
1.07 Declaration of Conformity
Declaration of Conformity
Application of Council Directive(s): The equipment described in this manual conforms to all applicable aspects and regulations
of the ‘Low Voltage Directive’ (European Council Directive 2006/95/EC) and to the National legislation for the enforcement of this
Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the “EMC Directive” (European
Council Directive 2004/108/EC) and to the National legislation for the enforcement of this Directive.
Manufacturer: Victor Technologies International Inc.
Address: 16052 Swingley Ridge Road
Suite 300
Chesterfield, MO 63033 U.S.A.
Type of Equipment: Plasma Cutting
Model /Number: Ultra-Cut 100 XT, 200 XT, 300 XT and 400 XT
Serial Number: Serial numbers are unique with each individual piece of equipment and details description, parts used
to manufacture a unit and date of manufacture.
Market Release Date: April 18, 2013
Classification: The equipment described in this manual is Class A and intended for industrial use.
!
WARNING
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the
public low-voltage supply system. There may be potential difficulties in ensuring electromagnetic compatibility in
those locations, due to conducted as well as radiated disturbances.
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
Harmonized Standard of “EMC Directive”
EN 60974-10:2007 Arc Welding Equipment - Part 10: Electromagnetic compatibility (EMC) requirements
Harmonized Standard of “Low Voltage Directive”
EN 60974-1:2012 Arc Welding Equipment - Part 1: Welding power sources. (Supersedes Standard EN 60974-1:2005)
Extensive product design verification is conducted at the manufacturing facility as part of the routine design and manufacturing
process. This is to ensure the product is safe, when used according to instructions in this manual and related industry standards,
and performs as specified. Rigorous testing is incorporated into the manufacturing process to ensure the manufactured product
meets or exceeds all design specifications.
Victor Technologies. has been manufacturing products for more than 30 years, and will continue to achieve excellence in our
area of manufacture.
Manufacturer’s Authorized Representative
Steve Ward V.P. Europe and General Manager
Address: Victor Technologies International Inc.
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX
Date: January 16, 2014
Steve Ward
Full Name
V.P. Europe and General Manager
(Position)
(Signature)