Tweco 400 Ultra-Cut(May 2014) User Manual
Page 64
Advertising
ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
3-40
INSTALLATION Manual 0-5302
2. Reinstall the Arc Starter Cover. Ensure that the ground wire is not crimped between the cover and the base.
Art # A-12059
Lower screws
(2 per side)
Upper screws (2 per side)
Cover
Ground Wire
3. The Arc Starter must be grounded; the grounding terminal is marked . Refer to the previous section for grounding
details.
Ground Cable
Art # A-04758
1 Nut and 1 Washer
Remain in Place
Torch Leads
Advertising
This manual is related to the following products: