Tweco 400 Ultra-Cut(May 2014) - Manual (Page 53)

ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
Manual 0-5302 INSTALLATION 3-29
Preparation
1. Remove the screws securing the Cover Panel to the Module.
Loosen or remove 2 screws
Remove 2 Screws
Art # A-09144_AB
2. Carefully remove the cover from the module noting the attached wire harness that connects to J4. Remove
the wire harness and then set the cover to the side.
Art # A-09145