Tweco 400 Ultra-Cut(May 2014) User Manual
Page 82
Advertising
ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
4-10
OPERATION Manual 0-5302
1. For the remotely mounted DSC 3000 insert the flash drive in the USB connector on the back. If using the TSC 3000 mounted
in the plasma supply front panel the USB connector is in the front under the clear plastic protective screen.
2. Go to the HOME screen. Select SETUP. Enter the 5 digit password (00000) unless you’ve changed it.
3. Press the “Restore Custom <USB.
Art # A-09235_AB
4. Shortly, almost instantly if only a few files, you should see at the bottom “Status: Copy to .\Files\Custom/Complete” then you
can remove the USB flash drive.
Advertising
This manual is related to the following products: