Tweco 400 Ultra-Cut(May 2014) User Manual
Page 65
Advertising
ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
Manual 0-5302
INSTALLATION
3-41
4. Use a clamp to secure the Torch Lead Shield braid brass ring to the port on the Remote Arc Starter as shown.
Art # A-04759
Coolant and Pilot Leads
to Torch Valve Assembly
Torch Leads Shield
Shield Clamp
Connect Control Cable
1. Connect the Remote Arc Starter cable to the Remote Arc Starter receptacle.
USER INPUT
HEIGHT CONTROL
F1 - 8A SB 230 VAC
F2 - 8A SB 230 VAC
CB4 - 5A 120 VAC
CB3 - 5A 24 VAC
CB2 - 5A 120 VAC
J55 - GCM
J15 - CNC
J59 - RAS
J70 - HE
J54 - TSC /COMM
Art # A-12067
Advertising
This manual is related to the following products: