Tweco 400 Ultra-Cut(May 2014) - Manual (Page 81)

ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
Manual 0-5302 OPERATION 4-9
4.08 Back up and Restoration of Custom Processes
Users can create their own custom cut processes. These can be lost by accidentally deleting them on the TDC 3000 or they can
be over written when updating programs. They can also be lost if the DSC 3000 should be replaced. We recommend you back
up your custom processes every time a new one is created. To back up you will need a USB Flash drive.
Backing Up Custom Process:
1. For the remotely mounted DSC 3000 insert the flash drive in the USB connector on the back. If using the TSC 3000 mounted
in the plasma supply front panel the USB connector is in the front under the clear plastic protective screen.
2. Go to the HOME screen. Select SETUP. Enter the 5 digit password (00000) unless you’ve changed it.
3. Press button “Back Up Custom>USB”
4. Very quickly, depending on how many custom processes there are, you should see along the bottom of the screen the mes-
sage “Copy to D:\TD\CustomFiles\Complete” at which point you can remove the flash drive.
Art # A-09234_AB
Restoring Custom Processes:
During file backup (see previous process) a folder and sub folders called “TD” were placed on your flash drive. You should copy
this folder with its subfolders to some secure place. Making more than one copy is advised. If the need arises to restore from
this backup, place the entire TD folder in the root directory (not in another folder) on a USB flash drive and plug it into the USB
port on the TDC 3000.