Tweco 400 Ultra-Cut(May 2014) User Manual
Page 62
Advertising
ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
3-38
INSTALLATION Manual 0-5302
Coolant Return (Red)
Coolant Supply (Green)
Art # A-12062
Green
Red
2. Refer to illustration. Connect the Pilot wire and Negative cables using a star washer on each.
NOTE
* Slave and Master refer to only those set ups using two power supplies in parrallel. Slave is not used in single
system operations.
*Negative (Master)
Torch Lead
Pilot
Art # A-12063_AB
*Negative (Slave)
Negative Master, Negative Slave and Pilot Cables (from Power Supply )
Advertising
This manual is related to the following products: