Tweco 400 Ultra-Cut(May 2014) - Manual (Page 57)

ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
Manual 0-5302 INSTALLATION 3-33
Insert Fiber Optic cable here
Art # A-09153_AB
4. Secure each of the thin nuts on the through hole protectors so both nut faces are tight against the sheet metal inside and
out.
5. Plug the Fiber Optic Cable into the PCB as shown below for the DMC-3000. Make sure the locking tabs are engaged.
Plug Fiber Optic cable to/from DPC-3000 here
Art # A-09154
6. Plug the Fiber Optic Cable into the PCB as shown below for the DPC-3000. Make sure the locking tabs are engaged.