Great Plains NP3000A Operator Manual User Manual
Operator manual, Manufacturing, inc
Advertising
Manufacturing, Inc.
© Copyright 2013
Printed 2014-04-22
407-613M
EN
Operator Manual
Nutri-Pro
®
NP3000 and NP3000A
30-Foot Fertilizer Applicators
Read the operator manual entirely. When you see this symbol, the
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
Illustrations may show optional equipment not supplied with standard unit, or may show
NP30, NP40 or NP4000 models where the topic function is identical.
31959
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Operator Manual
- Table of Contents
- Important Safety Information
- Anhydrous Ammonia Safety
- Read All Manuals
- Look for Safety Symbol
- Be Aware of Signal Words
- Prepare for Emergencies
- Be Familiar with Safety Decals
- Wear Protective Equipment (PPE)
- Avoid High Pressure Fluids
- Minimize Radiation Exposure
- Keep Riders Off Machinery
- Use Safety Lights and Devices
- Tires Not a Step
- Remain Clear of Overhead Lines
- Transport Machinery Safely
- Handle Chemicals Properly
- Shutdown and Storage
- Tire Safety
- Practice Safe Maintenance
- Safety At All Times
- Safety Decals
- Safety Reflectors and Decals
- 818-055C Slow Moving Vehicle Reflector
- 838-266C Red Reflectors
- 838-265C Amber Reflectors
- 838-267C Daytime Reflectors
- Raven 039-0159-034 (Option) Danger: Ammonia
- 115527-01 (Option) Danger: Bleed System
- 818-323C Danger: Possible Chemical Hazard
- 818-590C Danger: Hitch Crush
- 838-599C Danger: Electrocution
- 848-534C (Squibb-Taylor FM125-2000) Danger: Safety Coupler (Option)
- 818-337C Warning: Speed
- 818-437C Warning: High Pressure Fluid Hazard
- 818-860C (Option) Warning: Moving Parts
- 848-551C Warning: Towing
- (no part number) Warning: Ball Valve (Option)
- Raven 039-0159-035 Caution: Ammonia (Option)
- Snyder 997176 (Option) Warning: Tank Installation and Use
- 818-398C Caution: Tires Not a Step
- 818-587C Caution: Read Operator’s Manual
- 818-719C Caution: Read Operator’s Manual
- 838-092C Caution: Tire Pressure and Bolt Torque
- 838-380C Caution: Transport Locks
- 838-595C Caution: Tire Pressure and Bolt Torque
- 848-736C Caution: General
- 848-539C General Safety: First Aid Water (Option)
- Introduction
- Application Overview
- Preparation and Setup
- Operating Instructions
- Pre-Start Checklist
- Raising/Lowering Applicator
- Unfolding and Folding
- Transport
- Final Applicator Setup
- NH3 Operations
- NH3 Nurse Tanks
- NH3: Safing Applicator Before Cart Hitch
- NH3: Check Hydrostatic Relief Valves
- NH3: Close Bleed Valves
- NH3: Check Hose Discharged
- NH3: Hitching Nurse Tank
- NH3: Making Nurse Tank Connections
- NH3: Dry Run
- NH3: Pass Planning
- NH3: Monitor Operation
- NH3: Field Application
- NH3: Breakaway Event
- NH3: Unhitching Nurse Tank
- Liquid Operations
- Field Set-Up Checklists
- Field Operation Checklists
- Short-Term Parking
- Long-Term Storage
- Adjustments
- Fertilizer Rates
- Anhydrous Fertilizer Rate
- Conventional Liquid Fertilizer Rate
- Ground Drive Rate: NP3000-1230 Standard
- Ground Drive Rate: NP3000-1230 Side Dress (SD)
- Select and Install Orifice Plates
- Strainer Adjustment
- Ground Drive: Setting Relief Valve
- Ground Drive: Set Pump Drive Range
- Ground Drive: Set Pump Rate Dial
- Hydraulic Drive: Pump Pressure
- Troubleshooting
- Maintenance and Lubrication
- Avoid Trapped Anhydrous
- System Discharge
- Clearing Plugged Tines
- Hydrostatic Relief Valve Maintenance
- Replacement Log
- Metering System Maintenance
- Material Clean-Out (Liquid)
- Liquid Fertilizer Strainer Maintenance
- Pump Maintenance and Repair
- Coulter Disc Replacement
- NH3 Coulter Spring Setting
- Hydraulic Maintenance
- Wing Leveling
- Rear Eyebolt Adjustment
- Caster Brake Adjustment
- Chain Maintenance
- Lubrication and Scheduled Maintenance
- Options
- Discretionary options include:
- Accessories available include:
- 2-Point Hitch and Tank Selection
- Category II Hitch Pin Kit
- Row Cleaners
- Terra-Tine™ Row Cleaners
- Coulters, Blades and Tines
- Vantage I Coulters
- Manifolds and Accessories
- Pumps
- Anhydrous Metering
- Console
- Rear Hitch
- Nurse Tank Light Harness
- Side Dress Extension
- Weight Kit
- Appendix A - Reference Information
- Appendix B - Initial Setup
- Appendix C - Option Setup
- Appendix D - Accessory Installation
- Side Dress Installation
- Conventional Liquid Side Dress
- Anhydrous (NH3) Side Dress
- Prepare Applicator
- Install Anhydrous Coulter
- Add NH3 Divider Port
- Cut New Tubing
- Connect Side Dress Tubing
- Shift 2-Point Hitch
- Re-Space Caster Pivots
- Caster Angle Adjustment (s/n C1017A+)
- 90 Inch (In Row) Spacing
- 120 Inch (Out of Row) Spacing
- Changing Spacing
- Re-Space Caster Pivots (s/n C1016A-)
- Reset and Disable Pumps
- Reverting to Pre-Emergence
- Weight Kit Installation (s/n C1017A+)
- Warranty
- Side Dress Installation
- Index