Using this manual – Great Plains NP3000A Operator Manual User Manual
Page 23
Great Plains Manufacturing, Inc.
Introduction
19
2014-04-22
407-613M
Using This Manual
This manual familiarizes you with safety, assembly,
operation, adjustments, troubleshooting, and
maintenance. Read this manual and follow the
recommendations to help ensure safe and efficient
operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
“Option” refers to components not part of the standard
product, and not “optional” steps. If the component is
installed, the instructions apply.
Identifies an Economic (not a Safety) Risk:
NOTICE provides a crucial point of information related to the
current topic. Read and follow the instructions to avoid damage
to equipment and ensure desired field results.
Note: This form sets off useful information about the
current topic, or forestalls possible
misunderstanding.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line crt
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
Single-digit and single-letter callouts refer to local
illustrations. The callout numbers/letters may be
re-used for different items on other pages.
Two-digit callouts in the range
to
and
to
refer to the same tank and Nutri-Pro
®
plumbing
system components throughout this manual. “
A00
”
references are for Anhydrous. “
L00
” references are
for conventional Liquid.
Callouts
and above refer to parts of Options
(see Appendix C).
U
D
F
B
L
R
1
A00
L00
A11
A36
L11
L51
24
24