Great Plains NP3000A Operator Manual - Manual (Page 24)

20 NP3000 and NP3000A Table of Contents Index Great Plains Manufacturing, Inc.
407-613M Table of Contents Index 2014-04-22
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Refer to Figure 2 or Figure 3
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer.
For 2013 and later applicators, the serial number plate is
located on the center section, on the front face of the left
front fold cylinder mount.
For 2012 and earlier applicators, the serial-number plate
is located on the rear face of the center frame, ahead of
the left caster pivot.
Record your fertilizer applicator model and serial number
here for quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
[email protected]
785-823-3276
Figure 2
2013+ Serial Number Location
36030
M # N P4 0A -25S 20
Figure 3
2012- Serial Number Plate
31885