Great Plains NP3000A Operator Manual - Manual (Page 135)

2014-04-22 Table of Contents Index 407-613M
Great Plains Manufacturing, Inc. Table of Contents Index 131
Options
The base Nutri-Pro ® NP3000 and NP3000A is 2-point/
lift-assist tool bar with a choice of:
front frame (tanks or no tanks) ...................................131
coulters (single or triple-row; without nozzles) ...........133
Discretionary options include:
manifold (three choices) .............................................135
coulter applicators (three choices) .............................134
pump (two choices) ....................................................137
trailing hitch ................................................................139
These options are installed prior to delivery if ordered
with the applicator.
Accessories available include:
Category II hitch pins..................................................132
controller console .......................................................138
side dress extension (three choices)..........................140
speed sensor..............................................................139
a variety of speed sensor cables, for new or existing
sensors. ..............................................................138
2-Point Hitch and Tank Selection
A forward sub-frame is required on the applicator, and is
supplied with the choice of tanking.
The tank option (41) includes tank plumbing, selector
valve, and quick-fill inlet at the front tool bar.
The no-tank option (40) includes no plumbing. Use with a
tractor-mounted or trailing nurse tank requires
customer-provisioned plumbing.
Field conversion is not presently documented.
Conversion requires replacement of the forward
sub-frame.
Tank/Hitch
Original
Option
Part Bundle
Dual 300 gallon tanks,
large forward sub-frame
41 407-608A
No tanks,
small forward sub-frame
40 407-607A
31959_44%
31943
31844