Great Plains NP3000A Operator Manual - Manual (Page 54)

50 NP3000 and NP3000A Table of Contents Index Great Plains Manufacturing, Inc.
407-613M Table of Contents Index 2014-04-22
Lift Cylinder Locks
Use transport locks to hold the fertilizer applicator at
raised for transport, adjustments, maintenance and
storage.
Falling Hazard:
Do not climb or stand on tires or wheels. Even at full extension
on level ground, tires may not be in firm ground contact. They
could spin without warning. A fall could result in injury.
Refer to Figure 23
Transport locks are present on all wheel assemblies with
hydraulic cylinders. To install cylinder stops:
1. Open the lift-assist shut-off valve (page 48).
2. Fully raise implement (page 48). Set lift circuit to
Neutral.
3. Remove and store lift-assist spacers (page 43).
4. Place channel on lift cylinder rod of each cylinder to
be locked.
5. Re-install locking pin and secure with cotter pin.
6. Lower fertilizer applicator onto lock channels.
7. Set lift circuit to Float.
3
1
Figure 23
Rear Lift Cylinder Lock Channel
31619