Great Plains NP3000A Operator Manual - Manual (Page 169)

Great Plains Manufacturing, Inc. Table of Contents Index Appendix D - Accessory Installation 165
2014-04-22 Table of Contents Index 407-613M
Install Wing Extension
Refer to Figure 86 and Figure 87
If the wing extension is already installed, continue at
“Dismount Rear Coulters” on page 167.
11. Select one new:
407-331H BOLT ON WING FRAME
and eight sets new:
802-055C HHCS 5/8-11X2 GR5
804-022C WASHER LOCK SPRING 5/8 PLT
803-021C NUT HEX 5/8-11 PLT
12. With the Great Plains decal to the left, and the amber
reflector front, attach the extension to the end of
the left wing.
Note: Once installed, the extension itself never needs to
be removed, unless you need to reduce the higher
overall height when folded.
Install Quick-Attach Coulter Mount
This applies only to kit 407-636A and three-coulter
configurations, or applicators updated to quick-attach.
For other kits, or if the applicator rear coulters have
traditional clamp mounts, continue at “Dismount Rear
Coulters” on page 167.
If the applicator is a triple-coulter configuration
manufactured in late 2012 or later, the rear coulters are
on Great Plains quick-attach mounts (see page 134 for
an illustration). The Side Dress kit includes a quick-
attach mount for this situation.
Refer to Figure 88
13. Select one new:
407-972H QUICK-ATTACH MNTNG WELDMENT
two new:
806-016C U-BOLT 5/8-11 X 6 1/32 X 5 3/4
and four sets new:
804-022C WASHER LOCK SPRING 5/8 PLT
803-021C NUT HEX 5/8-11 PLT
14. Position the mount , ears forward, on the rear face
of the front tool bar of the wing extension. Loosely
secure it with U-bolts
, lock washers and
nuts .
15. Slide the mount along the tool bar until its center
is one row space from the left-most forward
coulter.
Figure 87
Install Wing Extension
31845
30
48
55
51
30
48
55
51
30
Note: Figure 88 depicts a rear-face installation. If your
front coulters are mounted on the tool bar front
face, install the side dress mount
on the front
face.
Note: Once installed, the mount does not need to be
removed when reverting to pre-emergence.
Figure 88
Install Quick-Attach Mount
36064
51
51
“Harvest Starts Here.”
51
58
55
51
s
51
58
55
51
51
58 55
51
51
5