Great Plains NP3000A Operator Manual - Manual (Page 146)

407-613M Table of Contents Index 2014-04-22
142 NP3000 and NP3000A Table of Contents Index Great Plains Manufacturing, Inc.
Appendix A - Reference Information
Specifications and Capacities
NP3000-1230
NP3000-1230
With On-Board Tanks
Standard Side Dress Standard Side Dress
Row Count 12 13 12 13
Row Spacing 30 in
Working Width 29 ft. 7 in. 31 ft. 11 in. 29 ft. 7 in. 31 ft. 11 in.
Transport Width 17 ft. 2 in.
Swath 30 ft. 0 in. 32 ft. 6 in. 30 ft. 0 in. 32 ft. 6 in.
Metering System Option: Raven Control/Section Valves, Pressure Sensor & RFM60P Flow meter
Controller Console Option: Raven SCS 450 (Optional)
Length, Transport 13 ft. 4 in. 13 ft. 4 in. 11 ft. 1 in. 11 ft. 1 in.
Length, Field 14 ft. 0 in. 14 ft. 0 in. 11 ft. 9 in. 11 ft. 9 in.
Working Height 9 ft. 7 in.
Transport Height (Folded) 11 ft. 1 in. 12 ft. 7 in. 11 ft. 1 in. 12 ft. 7 in.
Transport Clearance 16 in. nominal, depends on tractor hitch
Wing Down Flex 10°
145 - 180 hp 145 - 180 hp 145 - 180 hp 145 - 180 hp
1 or 2 Circuits, 2250 psi, 4 to 17 gal./min.
Weight, Maximum, Empty 13100 lbs 13400 lbs 10600 lbs 10900 lbs
Weight, Maximum, Full 18900 lbs 19200 lbs N/A N/A
Transport Tire Size 265/70B16.5 (10-16.5) (NHS 8-Ply Skid Loader 4140 lbs @ 5 mph)
Wing Gauge Wheel Tire 20.5X8.0-10 (Load Rating E, 1520 Pounds)
Operating Depth 0 to 6 in. Do not exceed 6.5 in. (release depth is 4.5 in. above coulter depth.)
Rear Hitch (Optional) Option: Schuck Model 850
Nurse Tank Capability 2000 Gallons
1. Power requirements vary significantly with conditions and practices.
Tankless
Min. Tractor HP Req.¹
Hydraulic Circuits Req.